35 HP Vanguard Kohler 27 HP
Vanguard 23 HP
Check to ensure that the throttle linkage on the engine moves throughout its full
range when the throttle lever is depressed and that it returns to the idle position
when released.
For added safety, a stainless steel throttle return spring has been installed during
factory assembly. This spring returns the throttle linkage to idle position when
the squeeze lever is released. To ensure that the throttle operates smoothly,
periodically lubricate the throttle linkages with a WD-40 type spray lubricant. For
freezing temperatures, stand the handle in a vertical position and inject
antifreeze into the throttle cable with a hypodermic needle and work the throttle
back and forth. This will keep any moisture from freezing your throttle.
To Next Page
Loading...
Need help?
General
