To Next PageTo Next Page
Need help?Do you have a question about the go-e Charger Gemini 11 kW and is the answer not in the manual?
General| Charging Power | 11 kW |
|---|---|
| Output Current | 16 A |
| Connector Type | Type 2 |
| Protection Class | IP54 |
| Operating Temperature | -30 °C to +50 °C |
| Integrated cable | No |
| Phases | 3 |
| Input Voltage | 400 V |
| Communication | Wi-Fi |
| Charging Cable Length | 5 m |
Explains warning symbols, electrician requirements, and manual references.
Observing safety, downloading manuals, and retaining documents for future reference.
Lists and describes key product parts like RFID chip, reset card, sockets, and LEDs.
Lists necessary tools and included hardware for product installation.
Step-by-step instructions for attaching the wall bracket securely to the wall.
Instructions for hanging the charger and optional anti-theft device installation.
Details on the built-in DC protection module and AC detection capabilities.
Covers single/three-phase connections, cable shortening, ripple control, and static load management.
Steps for starting the charger, performing a self-test, and preparing for operation.
How to use the charger's button to select predefined charging levels.
Instructions for connecting the charger to a hotspot via the app.
Instructions for connecting the charger to Wi-Fi via the app.
Essential safety guidelines for using the go-e Charger and avoiding hazards.
Information on electrical safety, installation, and compliance with local regulations.
Covers legal obligations, warranty terms, and proper disposal of the device.
