Need help?Do you have a question about the go-e Charger HOME+ and is the answer not in the manual?
General| Connector Type | Type 2 |
|---|---|
| Weight | 2.5 kg |
| Protection Class | IP54 |
| Wi-Fi Connectivity | Yes |
| App Control | Yes |
| Dynamic Load Balancing | Yes |
| Standby Consumption | < 1 W |
| Communication Protocol | OCPP 1.6 |
| RFID | Yes |
| Input Voltage | 230 V |
| Output Voltage | 230 V |
| Phases | 1 |
| Cable Length | 5 m |
| Operating Temperature | -30°C to +50°C |
| Residual Current Protection | Yes |
| Charging Power | 11 kW |
| Output Current | 16 A |
Details on activating and deactivating charging via the app.
How to adjust charging current levels through the app.
Options for controlling access and starting charging sessions.
Understanding and configuring the ground check safety feature.
Guide to setting up the hotspot connection for initial configuration.
How to connect and control the charger remotely via the internet.
To Next Page
