Need help?Do you have a question about the GO FAN YOURSELF Z-TECH and is the answer not in the manual?
Pre-installation checklist for contractors and facility managers.
Post-installation checklist for contractors and facility managers.
Contents of the top tray in the motor assembly box.
Contents of the middle tray in the motor assembly box.
Contents of the bottom tray in the motor assembly box.
Identification of VFD controllers and fan blade box.
Rules and distances for fan placement and clearances.
List of tools needed for product installation.
Essential steps to complete before starting installation.
Instructions for mounting fans onto I-beams.
Mounting using angle iron on the bottom chord.
Mounting using angle iron on the top chord.
Securing L-brackets to the mounting structure.
Mounting to Z-purlins using specific hardware.
Steps for securing the standard mount assembly.
Procedure for installing the down tube and safety cables.
Steps to assemble the fan's main hub and drive components.
Procedure for installing guy wires for fan stability.
Steps for attaching fan blades to the hub.
Safety rules for electrical installation procedures.
Specifications for required wiring types and sizes.
Guidelines for maximum cable lengths between components.
Electrical power needs for the fan system.
Proper routing and separation of electrical wires.
Connecting ESFR to ACS355 controller for suppression system.
Connecting ESFR to ACS255 controller for suppression system.
Basic operating instructions for ACS355 VFD controller.
Basic operating instructions for ACS255 VFD controller.
Best practices for operating fans with ACS355.
Best practices for operating fans with ACS255.
Safety measures to follow during maintenance.
Specific clearance distances for fan installation.
List of services included in the annual plan.
Checklist for the annual performance plan.
Record keeping for annual performance plan results.
General tips and tests for ACS355 issues.
Understanding LED indications and alarms for ACS355.
Procedure to access and review the ACS355 fault logger.
Examining specific fault details and diagnostics for ACS355.
Descriptions and corrective actions for common ACS355 faults.
Troubleshooting common fan issues with ACS255.
Procedures to test ACS255 VFD and motor housing.
Navigating ACS255 for parameters and faults.
Details on what is covered and excluded by warranty.
Step-by-step instructions for filing a warranty claim.
Conditions for warranty validity and liability limits.
General| Brand | GO FAN YOURSELF |
|---|---|
| Model | Z-TECH |
| Category | Fan |
| Language | English |
To Next Page