Go Power GP-ISW-3000 User Manual

[page 2] | gpelectric.com
Congratulations on purchasing your Go Power! GP-ISW Inverter. The unit is a highly reliable DC-
AC inverter system, designed with advanced power electronic and microprocessor technology
o󰀨ering the following features;
• Pure Sine wave output (THD <5%).
• Intelligent power management software.
• Load and temperature controlled cooling fan.
• GP-SWR-A/GP-ISW-R management and control.
• Dry contact terminals.
• Advance protection features;
• Input over/under voltage protection.
• Internal over temperature protection.
• Input reverse polarity protection (fuse).
• Output overload protection.
• Output short-circuit protection.
Product Packaging
Please safely store the packaging the GP-ISW was delivered in or please
recycle the packaging components as outlined below;
CFB
CFB
3
4
7
CFB
CFB
3
4
7
Plastic Bag
Plastic Foam
Plastic Bubble
Wrap
LDPE
Low Density
Polyethylene
CFB
CFB
3
4
7
CFB
CFB
3
4
7
CFB
CFB
3
4
7
Corrugated berboard
Main box &
Internal sleeve
CFB
CFB
3
4
7
Corrugated
Recycles
www.corrugated.org
www.earth911.com/recycling-center-search-guides
Local recycling centres can be found here;

Go Power GP-ISW-3000 Specifications

General

Output Power	3000W
Output Waveform	Pure Sine Wave
Output Voltage	120 VAC
Peak Surge Power	6000W
Efficiency	90%
Frequency	60 Hz
Cooling	Fan Cooled
Protection Features	Overload, Short Circuit, Over Temperature

Summary

General Information and Safety

Cautions and Warnings

Important safety instructions and cautionary markings for product installation and operation.

General Safety Guidelines

Details various warning symbols, limitations on use, and equipment damage precautions.

Personal Safety Precautions

Equipment Safety Procedures

Instructions for safe handling, servicing, wiring, and environmental considerations for the unit.

Battery Safety Protocols

Essential safety measures for handling, connecting, and maintaining batteries for the inverter system.

Installation Procedures

Mounting Requirements and Guidelines

Covers essential requirements for temperature, ventilation, fire safety, accessibility, and placement.

DC Wiring Best Practices

Guidelines for DC cable management, connection minimization, voltage matching, and color coding.

DC Wiring Sizing and Protection

Recommendations for cable gauge, fuse/breaker sizing, and minimizing voltage drop for DC connections.

DC Cable Preparation and Connection

Wiring Inverter to Batteries

Critical warnings and steps for safely connecting the inverter to the battery bank.

DC Grounding Procedures

Explains chassis grounding, DC grounding system, and bonding requirements for safety.

Operation and Configuration

Final Installation Inspection

LED Indicators - Fault Conditions

Output Voltage and Frequency Selection

Shutdown and Protection Conditions

Details the conditions for shutdown and alarm related to voltage and temperature protection.

Product Specifications