Go Power GP-RVC-R User Manual

gpelectric.com | [page 11]
STATUS, SETTINGS AND COMMANDS
Equ Time
Equalization
Duration
0min 0 - 600min
The equalize duration is the amount of
time the equalization voltage will be ap-
plied to the battery.
BST Time
Absorption
Duration
120min 0 - 600min
The absorption duration is the amount of
time the bulk-absorption voltage will be
applied to the battery during the absorption
stage.
Equ Int
Equalization
Interval
0days 0 - 250 Days
The equalize interval is the frequency
at which an equalize charge will be
performed to maintain the battery.
T Comp
Temp Comp
Factor
-24mV/C 0 to -30mV/C
The temperature compensation factor
is used to adjust the charging current
according to the measured temperature of
the battery to ensure there is no damage
to the battery. This is not valid for Lithium
batteries.
Commands
Force CHG Not in App Normal
Normal, Main
Bulk, Main Flt,
Alx Bulk, Alx Flt
Force the controller into either bulk or oat
charge stage on either battery bank 1 or 2
Set Defualts
Reset to Factory
Default
N/A N/A Set all settings to default
Clear History Not in App N/A N/A Reset historical data

Go Power GP-RVC-R Specifications

General

Brand	Go Power
Model	GP-RVC-R
Category	Monitor
Language	English