Go Power GP-SF-1.5 User Manual

GP‐SF‐1.5
___________________________________________________________
3

Do not touch the terminals while the module is exposed to light. Cover the
module face completely with opaque material to halt the production of electricity
when installing or working with modules or wiring.
Be aware that the solar module is a live power source generating electricity when
exposed to any light source. Do not drop the solar module or allow objects to fall
on it. Do not concentrate sunlight on the solar module with a mirror or lens.
Observe proper polarity throughout the SUNfilm installation.
Follow the Safety Precautions of the battery manufacturer. Do not produce
sparks when working in locations where flammable gases or vapors exist.
3.0 Specifications
*Specifications subject to change without notice
Note: Specifications are measured values at standard test conditions of 1000
W/m2 at 25° C.
4.0 Features
• Portable design
• Rigid frame
• Maintenance free
4.1 Accessories
Rated power 1.5W
Peak current
100mA
Peak voltage 15VDC
Open circuit voltage 19.6VDC
Dimensions (inches) 6.5 x 14.5 x 0.5
Dimensions (mm)
165 x 368 x 12
Weight
0.5 kg / 1 lb
Warrant
y
5
y
ear limited
UPC 8-39085-00200-1
a. Male 12V car charger

b. Charging indicator light (on charger)

c. Length of wire 3m / 10 ft.

Go Power GP-SF-1.5 Specifications

General

Brand	Go Power
Model	GP-SF-1.5
Category	Battery Charger
Language	English