Go Power IC Series User Manual

Name: Go Power IC Series
Brand: Go Power
Rating: 4 (1 reviews)

52 pages

To Next Page

INVERTER/CHARGER

User Manual

GP-IC-2000

GP-IC-3000

Worldwide Technical Support and Product Information gpelectric.com

Go Power!

201-710 Redbrick Street Victoria, BC, V8T 5J3

Tel: 1.866.247.6527

79497_MANUAL_GP-IC-Series_RevH

Table of Contents3
General Information4
Cautions/Warnings4
Disclaimers7
IC Series Kit Parts7
Parts Checklist7
Unit Features8
Unit Dimensions10
Unit Accessories11
Installation Tools and Materials11
Installation12
TYPICAL Inverter/Charger SYSTEM OVERVIEW12
Location and Environmental Requirements16
MOUNTING the Inverter/Charger17
Mounting the Drip Shield17
General Wiring Specifications18
DC Wiring19
DC Wire Sizing20
DC Overcurrent Protection and DC Disconnect20
Preparing the DC Cables20
DC Cable Connections20
Battery Temperature Sensor21
WIRING the Inverter/Charger to the BATTERY BANK22
Battery Layouts23
DC Grounding24
Ac Wiring24
Ac Power Sources25
Ac Wire Size and Overcurrent Protection25
Gfci (Ground Fault Circuit Interruption) Outlets25
Ac Terminal Block Connections26
Ac Cable Connections27
AC WIRING 1 - Single Phase, ≤30A Service, Single In/Single Out29
AC WIRING 2 - Single Phase, 30A> Service, Single in /Single out30
AC WIRING 3 - Split Phase, 50A Service, Dual IN, Dual OUT, Option 131
AC WIRING 4 - Split Phase, 50A Service, Dual IN, Dual OUT, Option 232
Grounding the Inverter - Ac Grounding33
Disabling the Neutral to Chassis Ground Connection34
Grounding on Boats34
Final Inspection35
Testing the Installation35
Warning Labels35
Operation36
General Operating Notes36
AC POWER Pass-Through MODE38
Charging Mode39
Power Sharing Mode40
Generator Mode41
Inverting Mode42
Battery Temperature Sensor Operation43
Factory Default Values43
IC Series Fault Conditions44
Maintenance and Troubleshooting44
Specifications45
Important Safety Instructions48
Warranty Return Procedure49
Product End of Life Information - Recycling50

Questions and Answers:

Need help?

Do you have a question about the Go Power IC Series and is the answer not in the manual?

Go Power IC Series Specifications

General

Output Voltage	12 VDC
Battery Types	AGM, Gel, Flooded, Lithium
Protection Features	Over-voltage, Over-temperature
Operating Temperature	-4°F ~ 140°F (-20°C ~ 60°C)
Dimensions	Varies by model
Weight	Varies by model

Related product manuals

Go Power IC Series User Manual

Table of Contents

Questions and Answers:

Go Power IC Series Specifications

Related product manuals