Need help?Do you have a question about the Go Power GP-IC-2000 and is the answer not in the manual?
General| Output Power | 2000W |
|---|---|
| Input Voltage | 120 VAC |
| Output Voltage | 12 VDC |
| Charging Method | Multi-stage charging |
| Weight | 11.2 lbs (5.1 kg) |
| Dimensions | 11.8 x 8.3 x 3.5 in (300 x 210 x 90 mm) |
| Charger Type | Inverter charger |
| Battery Compatibility | 12V batteries |
| Battery Type | AGM, Gel, Flooded |
| Protection Features | Short circuit, over temperature |
Essential safety instructions, cautions, and warnings for operating the Inverter/Charger.
Details on the Inverter/Charger's main features, ports, and included accessories.
Comprehensive safety guidelines, including personal precautions and marine application considerations.
Guidelines for selecting an optimal installation site considering temperature, moisture, ventilation, and proximity.
Instructions for DC cable sizing, overcurrent protection, battery connection, and grounding.
Procedures for AC wiring, power source connection, and grounding the AC section.
Steps to test the installed Inverter/Charger system, including power-up and load verification.
Explanation of the Inverter/Charger's various modes: Inverting, Pass-through, Charging, and Power Sharing.
Lists common fault conditions, their causes, and recommended procedures to resolve them.
Recommended maintenance steps for the Inverter/Charger and battery bank to ensure longevity.
Detailed electrical, mechanical, and performance specifications for the GP-IC-2000/3000 models.
Information regarding Go Power!'s product warranty, terms, and the return process.
Guidance on environmentally responsible recycling and disposal of the product.
To Next Page
