GOAL ZERO Venture Jump User Manual

Covers risks of shock, explosion, fire, and proper handling of electrical components.

Addresses eye injury risks from battery acid/debris and hazards from explosive gases.

Details product usage warnings, including polarity, connections, and environmental factors.

Ensures product is kept from children and stored properly with waterproof plugs.

Introduction to the Venture Jump as an emergency jump starter and power bank.

Explains the meaning of the LED lights indicating battery charge levels.

Details the Jumper Cable Port, USB-A Output Ports, USB-C Input Port, and Power Button.

Describes how to operate the built-in flashlight and its modes.

Lists the included items: Venture Jump, USB-C to USB-A cable, and jumper cables.

Step-by-step guide on connecting the red (+) and black (-) clamps to the vehicle battery terminals.

Instructions for securely inserting jumper cable leads into the Venture Jump port.

Procedure for starting the vehicle, including timing and attempt limits.

Steps for safely disconnecting the jumper cables from the vehicle and the Venture Jump.

Explains the meaning of different LED indicator lights on the jumper cables.

Troubleshooting advice for when the gear is not charging, checking battery level and cables.

Confirms the Venture Jump's IP67 rating and its resistance to dust, sand, and submersion.

Details how the 44-lumen flashlight is controlled by the battery power button.

States that up to 10 jump starts are possible on a full charge and recommends recharging.

Specifies that charging via USB-C source takes approximately 3 hours.

Includes cell chemistry, capacity, lifecycles, shelf-life, and management system.

Details output and input specifications for USB-A and USB-C ports, and the jump starter.

Lists cable gauge, length, IP rating, chainability, weight, dimensions, and certifications.

States the product comes with a 12-month warranty.