Goalzero Sherpa 100PD User Manual

32
Included Cables:
USB-A Ports
Each Port
5V, up to 2.4A,
3.4A shared
(17W max) Combined
Battery
Level Display
Power On/Off
Qi Wireless
Charging
On/Off
Bidirectional (input/
output) USB-C Power
Delivery Ports
5V/9V/12V/15V/20V,
up to 3A (60W max)
USB-C to USB-A
Qi Wireless Charging
Pad (5W max)
CHARGE ME NOW: Plug in and charge up before first use.
FROM USB: Using the included USB-A to USB-C cable and the USB-C Power
Delivery (PD) port on the Sherpa, plug into a USB port. We recommend using
at least a 2.4A charger for a full charge in about 9 hours. You can also plug
into our 45W USB-C charger (sold seperately) for a 3+ hour recharge.
FROM SOLAR: Pair the Sherpa with a Nomad Solar Panel and charge up from
the sun. Using the included USB-A to USB-C cable, plug into the USB output
on the solar panel. For the best solar charging experience, we recommend the
Nomad 28 Plus Solar Panel.
CHARGING YOUR SHERPA
Sherpa 100PD
Power Bank
Nomad 28 Plus
Solar Panel
Wall Outlet
Lights
Cameras
Phones, Tablets,
USB-C Laptops
HOW IT WORKS
GET TO KNOW YOUR GEAR

Goalzero Sherpa 100PD Specifications

General

Cell Chemistry	Li-ion NMC
Weight	1.4 lbs (635 g)
Cycle Life	500 cycles to 80% capacity
USB-C Port (Input/Output)	60W max
USB-A Ports (Output)	2x USB-A (12W total output)
Wireless Charging	5W
8mm Charging Port (Input)	Yes
Operating Usage Temp	32-104 F (0-40 C)
Warranty	12 months