7
Assembling/disassembling
and using the stick vac
Before assembling or disassembling
attachments, ensure the stick vac is
not plugged into the mains supply
and is switched off.
1. Align the top of the extension
pole with the bottom of the stick
vac main body and push up until
the extension pole clicks into
place.
2. Push the other end of the
extension pole into the top of the
floor head. Again it should click
into place.
The stick vac is now assembled,
ready for use.
3. Pop the plug into an electrical
socket and turn the power on.
To Next Page
Loading...
