Goblin SPEED - Page 46

[HA016-S]
[HA026-S][HA024-S] [HA112-S]
- 1 x Strong Main Gear ( Set ).
- 1 x Pinion (Set).
Strong Main Gear G700.
[H0320-S]
Aluminum ESC Heat Sink
[H0165-S]
SAB HELIDIVISION
Futaba Servo Horn
[HA050]
SAB HELI DIVISION Black Polo Shirt
[HM027-S-M-L-XL-XXL]
SAB HELI DIVISION Black Hoodies
[HM029-S-M-L-XL-XXL]
SAB HELI DIVISION Neck Strap
[HM034]
- 1 x Neck Strap.
- 4 x JR Servo Horn. - 1 x Plastic Servo Horn.
SAB HELI DIVISION New Black T-shirt
[HM025-S-M-L-XL-XXL]
SAB HELI DIVISION Keychain
[HM037]
SAB HELI DIVISION Stand
[HM038]
- 4 x O-ring 3050. - 2 x Velcro Battery Strap. - 8 x Heat Shrink - Clear.
- 1 x Aluminum ESC Heat Sink.
- 4 x Socket Head Cap M3x6mm.
- 4 x Cup Point Set Screws M3X20mm.
- 12 x Washer Ø3,3xØ6x0,5mm.
- 4 x Metric hex locknut Nuts M3H4.
[HA025-S]
- 1 x Rubber Canopy
Edge Protection. - 2 x Wrench Tool M8,M6.
SAB HELIDIVISION
JR Servo Horn
[HA050]
- SAB HELI DIVISION New Black T-shirt.
- SAB HELI DIVISION Black Polo Shirt. - SAB HELI DIVISION Black Hoodies.
SAB HELI DIVISION Decal
[HM035]
- 1 x SAB HELI DIVISION Decal ( set ).
- 1 x SAB HELI DIVISION Keychain. - 1 x SAB HELI DIVISION Stand ( Set ).
Aluminum Cooling Motor Mount
[H0316-S]
- 1 x Aluminum Third Bearing Support.
- 1 x Aluminum Cooling Motor Mount.
- 1 x Flanged Bearing Ø6 x Ø13 x 5mm.
- 2 x Socket Head Cap Screw M3x8mm.
- 2 x Aluminum Finishing Washers. - 2 x Spring 5.8 / 0.3 / LL 9.
- 2 x Socket Head Cap Screw M3x10mm. - 2 x Spring 3 / 0.5 / LL 12.
[BW5104-G]
[BW2720-G]
[BW5115] Tail Blade For 3D Flight
[BW4690] Main Blade For 3D Flight
Copyright © 2013 - SAB Heli Division - All rights reserved
Page 44
Chapter 18, Spare Parts
UPGRADES and ACCESSORIES