Need help?Do you have a question about the Goblin urukay and is the answer not in the manual?
Main helicopter dimensions, rotor diameters, and component sizes.
Crucial safety rules, warnings about complexity, and manufacturer disclaimer.
Essential safety rules for flying model helicopters and handling the device.
Steps for installing the motor, pinion, and setting belt tension.
Detailed steps for assembling the HPS2 main rotor head.
Detailed steps for assembling the HPS3 main rotor head.
Assembly of head and swashplate modules for HPS3 and HPS2.
Mounting and connecting swashplate servos to the frame.
Adjusting linkage rods for tracking and proper HPS head setup.
Guidance on choosing reduction ratios and setting up the transmission.
Steps for mounting the ESC and connecting its wires.
Mounting the flybarless control unit and receiver on the frame.
Securing batteries and checking for optimal center of gravity.
Essential checks and setup procedures before the first flight.
To Next Page
General
