Goblin urukay - Spare Parts

- 1 x CF Battery Tray.
- 6 x Flat Head Cap Screws
M2.5x5mm.
- 1 x Main Structure.
- 1 x Servo Support.
Battery Tray
[H0002-S]
Frame Spacer
[H0003-S]
- 3 x Frame Spacers. - 10 x Finishing Washers .
Finishing Washer M3
[H0007-S]
Main Structure
[H0009-S]
Servo Support
[H0010-S]
Column
[H0018-S]
- 4 x Columns.
- 1 x Swashplate Assembly.
- 2 x Bearings 30x
37x4mm.
- 4 x Uniballs M3x4
5 H3.
- 1 x Uniball M3x4
5 H18.
- 3 x Socket Head Cap Screws M2x5mm.
- 4 x Socket Head Cap Screws M2x8mm.
Swashplate
[H0023-S]
- 1 x Bearing Support.
- 1 x Bearing
12x 24x6mm.
- 3 x Flat Head Cap Screws
M2.5x5mm.
Bearing Support
[H0024-S]
Safety Lock Tail Boom
[H0038-S]
- 2 x Locking Element Tails.
- 4 x Metric Hex Nylon Nuts M3.
- 2 x Double Sided Tapes.
Locking Element Tail
[H0041-S]
Spacer Flybarless
[H0043-S]
- 3 x Spacer Flybarless.
- 1 x Supporto Flybarless.
- 1 x Flat Head Cap Screws
M3x8mm.
- 5 x Socket Head Cap Screws
M3x6mm.
- 1 x Linkage Tail
Support.
- 2 x Socket Head Cap
Screws M2.5x6mm.
Linkage Tail Support
[H0045-S]
Yellow Vertical Fin
[H0046-S]
- 1 x Yellow Vertical Fin.
- 2 x Socket Head Cap Screws
M3x12mm.
- 2 x Finishing Washers M3.
- 2 x Antenna Guide.
- 2 x Button Head Cap Screws
M3x4mm.
Antenna Guide
[H0050-S]
- 1 x Tail Pitch Slider 01.
- 1 x Tail Pitch Slider 02.
- 1 x Tail Pitch Slider 03.
- 1 x Spacer
8x 9x3.2mm.
- 1 x Uniball M3x4
5H3.
- 2 x Flanged Bearings
8x 12x3.5mm
Tail Pitch Slider
[H0053-S]
- 1 x Bell Crank Base.
Bell Crank Base
[H0058-S]
- 2 x Tail Case Spacers.
- 4 x Socket Head Cap
Screws M3x8mm.
Tail Case Spacer
[H0061-S]
- 1 x Bell Crank Lever.
- 1 x Bush Bell Crank.
- 1 x Washer
3x 4x0.5mm.
- 1 x Spacer
3x 4x9.6mm.
- 1 x Socket Head Cap Screw
M3x22mm.
- 2 x Flanged Bearings
3x 7x3mm.
Bell Crank Lever
[H0059-S]
- 1 x Uniball M3x4
5H18.
Uniball M3x4
5H18
[H0063-S]
- 1 x Safety Lock Tail Boom.
- 1 x Finishing Washer M3.
- 1 x Socket Head Cap
Screws M3x8mm.
- 5 x Uniballs M2 5H6.
- 5 x Uniball Spacers.
- 5 x Socket Head Cap Screws
M2x8mm.
- 5 x Socket Head Cap Screws
M2x6mm.
Uniball M2
5H6
[H0064-S]
- 5 x Uniballs M3x4
5H3.5.
Uniball M3x4
5H3
[H0065-S]
- 10 x Plastic Ball Link.
Plastic Ball Link
[H0066-S]
- 10 x Servo Spacers.
Servo Spacer
[H0075-S]
- 10 x Washers
3.1x 12x1.8mm.
- 2 x Boom Spacer.
- 1 x Set Screw M3x20mm.
Boom Spacer
[H0082-S]
Washer
3.1x 12x1.8mm
[H0078-S]
Canopy Positioner
[H0008-S]
- 2 x Canopy Positioner .
Canopy Knobs
[H0036-S]
- 2 x Canopy Knobs.
Chapter 18, Spare Parts
Page 39