Goby Robo H2O User Manual

20 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

CONTENTS

Safety and Warnings 2

General Information 3

Prior to Installation 4

Installation 5

Caring for your Cleaner 10

Troubleshooting 16

Warranty 19

HYDRO POWERED ROBOTIC

POOL CLEANER

OPERATING MANUAL

TM

Table of Contents

Questions and Answers:

D
Debbie HillAug 13, 2025
Why is my Goby Swimming Pool Vacuum Robo H2O not moving?
- W
  William Henderson Jr.Aug 13, 2025
  There might be several reasons why your Goby Robo H2O swimming pool vacuum is not moving or is moving slowly. Ensure the main drain is closed, and the pool filter is clean, including the pump strainer basket. Check the Flow Control Valve to ensure sufficient flow. If connected to a dedicated vacuum line, adjust the valves at the pool pad for optimal flow. Measure the Wheel RPM and adjust the flow if needed. Also, inspect inside the cleaner for any debris. Check the suction and adjust sliders if needed. Leaks in the pool system can also be a cause; look for bubbles and consult a pool professional.
B
Brittney ThomasAug 17, 2025
How to make Goby Swimming Pool Vacuum Robo H2O climb walls?
- C
  christinedeckerAug 17, 2025
  The Goby Robo H2O swimming pool vacuum is designed to climb most vinyl and gunite/cement vertical walls, except in pools with rounded walls. To improve wall climbing, test flow using the Flow Gauge and adjust as needed. Increase suction by closing sliders. Ensure the Hose Float is correctly positioned on the hose next to the Articulating Swivel, and verify that the Wheel RPM is correct.

Goby Robo H2O Specifications

General

Brand	Goby
Model	Robo H2O
Category	Swimming Pool Vacuum
Language	English

Summary

Warnings and Safety Information

IMPORTANT SAFETY INSTRUCTIONS

Read all instructions before use to understand risks and prevent injury, entrapment, or drowning.

DROWNING AND SUCTION RISKS!

Be aware of risks from suctioning cleaner; follow warnings to prevent serious injury or drowning.

SAFE USE OF YOUR POOL CLEANER

Guidelines for safe operation, including stopping the pump, keeping clear of moving parts, and adult supervision.

Prior to Installation

Installing Your Robo H2O Cleaner

Connecting Hoses

STEP 2: CONNECT HOSES

Connect the hose to the pool skimmer or a dedicated vacuum line, ensuring sufficient length for pool coverage.

HOSE CONNECTION TO SKIMMER

HOSE CONNECTION TO DEDICATED VACUUM LINE

Installation Steps

STEP 3: INSTALLATION - REMOVE AIR

CONNECTING TO THE POOL SKIMMER

Installation and Optimization

CONNECTING TO A DEDICATED VACUUM LINE

OPTIMIZING SPEED AND COVERAGE

Tips for adjusting cleaner performance for optimal speed and thorough pool coverage by modifying sliders or valves.

Caring for Your Robo H2O Pool Cleaner

IF ROBO H2O STOPS RUNNING

Cleaner Maintenance Details

ADJUSTING SUCTION SLIDERS

Troubleshooting Common Issues

ROBO H2O DOES NOT MOVE OR MOVES SLOWLY

Solutions for cleaner movement issues, checking flow, debris, suction sliders, and for leaks in the pool system.

ROBO H2O WILL NOT CLIMB POOL WALLS

Tips for improving wall climbing, checking flow, suction, hose float position, and overall wheel RPM.

Troubleshooting Performance Problems

Air Bubbles and Main Drain Issues

Climbing and Roller Contact Problems

Solutions for cleaner climbing too high, rollers not contacting, and suction issues by adjusting sliders or float.

Adjusting Equipment Pad Valves

ADJUST VALVES AT POOL EQUIPMENT PAD

Guidance on adjusting pool equipment pad valves for optimal cleaner performance, especially with variable speed pumps.