Goby Robo H2O - Page 8

8
8 HYDRO POWERED ROBOTIC POOL CLEANER
5. Onceowisinproperrange,removeFlow Gauge from
hose and connect hose to the cleaner’s Articulating
Swivel.
6. Add Hose Float and position it as close to the Articu-
lating Swivel as possible (see Figure 6). Turn the pool
pump ON and your Robo H20 Pool Cleaner will now
begin automatically vacuuming your pool.
Note: If more or less suction is needed, you will need to ad-
just the Sliders on the pool cleaner itself. Closing the white
sliders increases the suction and opening the white sliders
decreases suction. See Figure 12 on page 11 for detailed
instructions on this adjustment.
INSTALLING YOUR ROBO H2O POOL CLEANER
Figure 6
Hose Float
Figure 5