To Next PageTo Next Page
Need help?Do you have a question about the Godox AD200 Pro and is the answer not in the manual?
General| Power | 200Ws |
|---|---|
| Color Temperature | 5600K ± 200K |
| Wireless Range | 100m |
| Wireless Channels | 32 |
| Full Power Flashes | 500 |
| Guide Number | 60m at ISO 100 |
| Battery | Li-ion |
| Battery Capacity | 2900 mAh |
| Recycle Time | 0.01 - 1.5s |
| Weight | 590g (without battery) |
| Power Range | 1/1 to 1/256 |
| Wireless Groups | 5 |
| Modeling Lamp | LED |
| Compatible Systems | Canon, Nikon, Sony, Fujifilm, Olympus, Panasonic, Pentax |
| Dimensions | 172 x 75 x 73 mm |
Lists critical safety warnings for product use, storage, and handling to prevent hazards.
Identifies and labels the main body components of the flash unit.
Details the components of the Speedlite and Bare bulb flash heads.
Explains AV panel functions and wireless shooting setup.
Lists included and separately sold accessories for the product.
Step-by-step instructions for securely attaching the bare bulb flash head.
Details the features, cautions, and battery level indications for the lithium battery pack.
Explains the ON/OFF switch and automatic hibernation feature for power saving.
Describes how to control the modeling lamp on the speedlite flash head.
Explains how to set the flash unit as a slave unit for wireless transmission.
Details TTL mode, including FEC and High-Speed Sync functionality.
Explains how to adjust flash output in manual mode using a flash meter.
Describes setting up stroboscopic flash for capturing multiple images.
Explains how to display and interpret flash duration (t=0.1).
Details the function for maintaining stable color temperature within ±100K.
Instructions for enabling wireless function and setting communication channels.
Guide to setting communication groups (A-E) for wireless flash control.
Explains how to set Wireless ID for enhanced wireless control.
Lists and explains available custom function settings for the flash unit.
Details using the Wireless Control Port for remote adjustment and triggering.
Instructions for using the 3.5mm sync cord jack for synchronized firing.
Explains the over-temperature protection mechanism and flash limits.
Lists common LCD prompts (E1, E2, E3, E9) and their meanings.
Provides detailed technical data for the AD200Pro flash unit.
Instructions for upgrading the product's firmware using Godox G3 software.
Recommendations for device maintenance, handling, and warranty.
