To Next PageTo Next Page
Need help?Do you have a question about the Godox WITSTRO AD600BM and is the answer not in the manual?
General| Category | Camera Flash |
|---|---|
| Type | Monolight |
| Power Output | 600Ws |
| Recycle Time | 0.01 - 2.5 s |
| Color Temperature | 5600K ± 200K |
| Battery Type | Lithium-ion |
| Full Power Flashes per Charge | 500 |
| Fan Cooling | Yes |
| PC Sync Port | Yes |
| External Battery Port | Yes |
| Optical Slave | Yes |
| Channels | 32 |
| Groups | 5 (A, B, C, D, E) |
| Model | WITSTRO AD600BM |
| Guide Number | 87 (m ISO 100) |
| Power Adjustment Range | 1/1 to 1/256 |
| Flash Duration | 1/220 to 1/10000 s |
| Battery Capacity | 8700mAh |
| Weight | 2.66 kg (without battery) |
| Dimensions | 220 x 245 x 125 mm |
| Wireless Control | Yes |
| Compatible Triggers | Godox X system |
| Modeling Lamp | LED |
| Wireless Range | 100m |
| Mounting | Bowens Mount |
Essential safety precautions for product operation, including avoiding moisture, disassembly, and direct eye exposure.
Details setting the AD600BM as a slave unit for radio transmission with Canon/Nikon systems.
Steps to enable and configure wireless settings for radio transmission.
How to change channel IDs to prevent interference with other wireless systems.
Instructions for selecting communication groups (A-E) for wireless control.
Guidance on positioning and operating the flash in wireless shooting scenarios.
Enables flash synchronization with high camera shutter speeds for fill-flash.
Explains adjusting flash output from 1/1 to 1/256 in 1/3 stop increments.
Describes stroboscopic flash for capturing multiple images of moving subjects.
Covers setting flash frequency, number of flashes, and output for stroboscopic effect.
Information on flash head temperature limits and protection activation.
Lists error codes (E1, E2, E3, E9) and their meanings for troubleshooting.
