To Next PageTo Next Page
Need help?Do you have a question about the Godox V860IIS and is the answer not in the manual?
General| Display type | LCD |
|---|---|
| Product color | Black |
| Flash coverage | 20 - 200 mm |
| Built-in display | Yes |
| Channels quantity | 32 channels |
| Color temperature | 5600 K |
| Flash guide number | 60 m |
| Approximate recycling time | 1.5 s |
| Camera brands compatibility | Sony |
| Brand specific flash systems | TTL |
Weight and Dimensions| Depth | 76 mm |
|---|---|
| Width | 64 mm |
| Height | 190 mm |
| Weight | 540 g |
Describes the external physical parts of the flash unit, including hotshoe and ports.
Details the buttons and controls on the flash unit's operation panel.
Explains the display interface, its modes like TTL, Manual, and Multi.
Details the battery's features, specifications, and safety warnings.
Explains the procedure for installing and removing the battery pack.
Explains TTL mode operation and Flash Exposure Compensation.
How to use the flash as optical S1/S2 slaves.
Setting manual HSS for off-camera use.
Steps to configure the flash as an optical wireless master.
Steps to configure the flash as an optical wireless slave.
Steps for master unit wireless configuration.
Steps for slave unit wireless configuration.
How to set flash mode for 2.4G master unit.
How to set channel for 2.4G wireless sync.
Steps to set up the master unit for TTL wireless.
Steps to set up the slave unit for TTL wireless.
Verifying channel settings for wireless communication.
Guidance on physical placement for wireless shooting.
How to confirm the flash unit is ready for operation.
Performing a test to ensure the flash fires correctly.
Steps to set the master unit to manual flash mode.
How to adjust power output for different groups.
Describes the final step of capturing the image.
Steps to set the master unit to stroboscopic mode.
Setup for shooting with two slave groups.
Setup for shooting with three slave groups.
How to wirelessly control flash power and triggering.
Using the sync cord jack for wired triggering.
Explains the AF-assist beam function.
Instructions for extending flash coverage with the wide panel.
Explains the flash's thermal protection system.
Lists other system protections and error prompts.
Troubleshooting steps for charging issues.
Troubleshooting steps when the flash fails to fire.
Solutions for unexpected power shutoff.
Troubleshooting for the auto zoom function.
Solutions for incorrect exposure.
Troubleshooting for coverage issues.
