To Next PageTo Next Page
Need help?Do you have a question about the Godox AD600Pro and is the answer not in the manual?
General| Power | 600Ws |
|---|---|
| Color Temperature | 5600K ± 200K |
| Wireless Channels | 32 |
| Operating Temperature | -10 to 50°C |
| Power Range | 9 stops (1/1 to 1/256) |
| Recycle Time | 0.01-0.9 s |
| Flash Duration | 1/220 to 1/10000 s |
| Battery Capacity | 2600mAh |
| Battery Life | 360 full power flashes |
| Wireless Range | 100m |
| Guide Number | 87 m (ISO 100, with standard reflector) |
| Modeling Lamp | 38W LED |
| Triggering Options | Wireless, Optical, Sync Cord |
| Wireless Groups | 5 (A-E) |
| Power Source | Li-ion battery pack |
| Recycling Time | 0.01-0.9 s |
| Wireless Control | Built-in 2.4GHz receiver |
| Mounting | Bowens mount |
| Weight | 3 kg |
Instructions to read the manual for safety and proper operation.
Key safety warnings including keeping dry, avoiding disassembly, and eye safety.
Details on reference page numbers and alert symbols used throughout the manual.
Detailed labeling of the flash unit's body, including buttons, ports, and mounting points.
Details on the LCD screen display for TTL Autoflash mode and its indicators.
Overview of LCD screen displays for Manual and Multi flash modes.
List and visual representation of all items included in the product package.
List of optional accessories available for purchase to enhance photography effects.
Step-by-step guide on how to attach reflectors and other accessories to the flash head.
Instructions on how to correctly install the flash tube into the flash unit.
Guidance on how to adjust the angle and position of the flash unit's handle.
Key features and important safety warnings for the Li-ion polymer battery pack.
Step-by-step instructions for installing and removing the battery pack.
How to interpret battery level indicators on the LCD panel and battery itself.
Details on turning the unit on/off and its auto power-off function.
Explanation of how to set the AD600Pro as a slave unit in wireless flash modes.
Step-by-step instructions for operating the flash in TTL mode.
How to adjust flash exposure compensation (FEC) in TTL mode.
Explanation and usage of High-Speed Sync (HSS) for faster shutter speeds.
How to adjust flash output power in Manual mode using the Select Dial.
Setting the flash as optical S1 or S2 secondary units for synchronous firing.
Explanation of how flash duration is measured and displayed in M mode.
How to enable and use the Stable Color Temperature Function in M mode.
How to set flash output, frequency, and number of flashes for stroboscopic mode.
Formula and example for calculating the correct shutter speed for stroboscopic effects.
Table showing the maximum number of flashes possible at different output levels and frequencies.
How to configure the flash for wireless operation and initiate wireless settings.
Steps to set communication channels for interference-free wireless triggering.
How to assign slave units to different communication groups (A-E).
Guidance on positioning the master and slave units for optimal wireless flash shooting.
How to configure and shoot with multiple slave groups in TTL or different flash modes.
Solutions for common issues preventing wireless triggering in the Godox 2.4G system.
Detailed explanation of custom function settings, their signs, descriptions, and restrictions.
Explanation of OFF, Percentage, and PROP modes for the modeling lamp.
How to use the Wireless Control Port with FT-16 remote for wireless adjustments.
Using the Sync Cord Jack for wired triggering of the flash unit.
Explanation of the over-temperature protection system and flash count limits.
Details on other protection features and meanings of error codes displayed on the LCD.
Table detailing key specifications like flash mode, guide number, power, and dimensions.
Solutions for underexposed or overexposed flash exposures, including HSS and manual modes.
Steps to download software, connect the flash, and perform a firmware upgrade.
Advice on product care, service, and warranty terms for the AD600Pro.
