To Next PageTo Next Page
Need help?Do you have a question about the Godox Witstro AD600Pro and is the answer not in the manual?
General| Power Output | 600Ws |
|---|---|
| Color Temperature | 5600K ±200K |
| Battery Capacity | 28.8V/2600mAh |
| Full Power Flashes | 360 |
| Wireless Channels | 32 |
| Wireless Groups | 5 (A, B, C, D, E) |
| Charging Time | Approx. 3 hours |
| Compatible Mount | Bowens S-Type |
| Power Range | 1/1 to 1/256 |
| Recycle Time | 0.01-0.9 sec |
| Flash Duration | 1/220 to 1/10, 000 sec |
| Wireless Control | Built-in 2.4G wireless X system |
| Weight | 3 kg (6.6 lb) without flash tube & reflector |
| Modeling Lamp | 38W LED |
| Guide Number | 87 m (ISO 100) |
| Power Source | Lithium-ion battery pack |
| Operating Temperature | -10 to 45°C |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Flash Triggering | Optical |
Details TTL mode, FEC, and High-Speed Sync functions.
Explains manual flash output adjustment and flash range.
Explains stroboscopic flash, calculating shutter speed, and flash limits.
Details compatibility, settings, and operation for 2.4G wireless shooting.
Addresses common reasons and solutions for not triggering in Godox 2.4G wireless.
Explains how to access and configure various custom function settings.
Details conditions triggering over-temperature protection and flash limits.
Describes error codes and meanings related to system protection.
