Do you have a question about the Godox DPIII Series and is the answer not in the manual?
Steps for preparing the flash unit for use, including lamp cover and reflector installation.
Details on controlling the modeling lamp's mode, brightness, and auto-off function.
Adjusting flash power output from 1/64 to 1/1, and using the test button for discharge.
Connecting a sync cord for synchronous firing with the camera shutter.
Utilizing three different optic slave triggering modes for synchronized flash.
Step-by-step guide for safely replacing the flash tube, including precautions.
| Model | DPIII Series |
|---|---|
| Type | Monolight |
| Guide Number (ISO 100) | 58m |
| Color Temperature | 5600±200K |
| Operating Voltage | AC 100-240V, 50/60Hz |
| Triggering Method | Sync cord |
| Wireless Control | 2.4G Wireless |
| Channels | 32 |
| Compatibility | Godox X System |
Loading...