Do you have a question about the Godox V860IIIN and is the answer not in the manual?
Type | Speedlite |
---|---|
Flash Duration | 1/300s to 1/20000s |
Color Temperature | 5600K ± 200K |
Channels | 32 |
Groups | 5 (A, B, C, D, E) |
Wireless Range | 100m |
TTL Dedication | Yes |
Strobe Function | Yes |
LCD Display | Yes |
Guide Number | 60m (at ISO 100, 200mm) |
Zoom Range | 20-200mm |
Wireless Control | Yes |
Compatible Cameras | Canon, Nikon, Sony, Fujifilm, Olympus/Panasonic |
Battery | Li-ion rechargeable (2600mAh) |
Full Power Flashes | 650 |
Manual Power Adjustment | 1/1 to 1/256 |
Identifies the main physical parts of the flash unit.
Details the buttons and controls on the flash unit's interface.
Explains the information and indicators shown on the LCD screen.
Instructions for installing and removing the battery pack.
Explains the functionality and automatic exposure calculation of i-TTL mode.
How to adjust flash output for correct exposure in i-TTL mode.
Enables flash synchronization at fast shutter speeds for fill-flash.
Creates light trails by firing the flash before the shutter closes.
Using the flash as an optic S1 slave unit in manual mode.
Using the flash as an optic S2 slave unit in manual mode.
Formula for calculating shutter speed for stroboscopic flash effects.
Enabling and configuring wireless flash communication between units.
Assigning flash units to different firing groups for complex lighting.
Setting communication channels to avoid signal interference.
Setting wireless IDs to prevent interference with other systems.
Scanning for available communication channels to avoid interference.
Configuring a single receiver unit for automatic wireless flash.
Verifying that transmitter and receiver units share the same communication channel.
Using a sync cord for triggering the flash.
Using the modeling lamp for previewing light effects.
How the AF assist beam functions and how to control it.
Explanation of the flash's overheat protection system.
Details other system protections and error prompts.