To Next PageTo Next Page
Need help?Do you have a question about the Godox X2TS and is the answer not in the manual?
General| Type | Wireless Flash Trigger |
|---|---|
| Wireless Standard | 2.4GHz |
| Wireless Transmission Range | 100m |
| Channels | 32 |
| Groups | 5 |
| Power Supply | 2 x AA batteries |
| TTL Autoflash | Yes |
| Manual Flash | Yes |
| Stroboscopic Flash | Yes |
| High-Speed Sync | Yes |
| Sync Speed | 1/8000s |
| Flash Exposure Lock (FEL) | Yes |
| Focus Assist | Yes |
| Modeling Flash | Yes |
| Wireless ID | Yes |
| Firmware Upgrade | Yes |
| Zoom Setting | Yes |
| Display | LCD |
| Flash Exposure Compensation (FEC) | -3 to +3 EV in 1/3 steps |
Steps to set the wireless channel for communication between units.
Switching between TTL, M, and MULTI flash modes.
Adjusting the flash power output in M mode.
Adjusting FEC in TTL mode.
Configuring multi-flash parameters like output, frequency, and times.
Overview and explanation of available custom functions.
Instructions for using the trigger with camera-mounted flashes.
How to use the trigger with studio lighting equipment.
Pairing the trigger with a smartphone for wireless control.
