To Next PageTo Next Page
Need help?Do you have a question about the Godox Xpro-S and is the answer not in the manual?
General| Type | Compact flash |
|---|---|
| Flash modes | Auto, Manual, Stroboscopic |
| Display type | LCD |
| Product color | Black |
| Channels quantity | 32 channels |
| Transmission range | 0 - 100 m |
| Operating frequency | 2400 MHz |
| Approximate recycling time | - s |
| Camera brands compatibility | Sony |
| Flash exposure compensation | Yes |
| Brand specific flash systems | TTL |
| Battery type | AA |
| Power supply type | Battery |
| Number of batteries supported | 2 |
Weight and Dimensions| Depth | 58 mm |
|---|---|
| Width | 90 mm |
| Height | 50 mm |
| Weight | 80 g |
Identifies physical components and controls on the flash trigger unit.
Explains the display layout and indicators of the flash trigger.
Step-by-step guide for inserting batteries into the device.
How to interpret the battery status displayed on the LCD.
Operational guide for using the trigger with camera-mounted flashes.
Instructions for controlling outdoor flashes remotely.
How to use the trigger with compatible Sony speedlights.
Guide for operating studio flashes via the trigger.
Using the device for remote camera shutter release functionality.
Connecting and operating the trigger using a wired sync connection.
Basic operation for turning the flash trigger on and off.
Details the device's power-saving standby feature.
Controls the AF assist beam functionality for improved focusing.
Procedure to set the wireless channel for communication.
Configures wireless IDs to prevent signal interference.
Adjusting the trigger's operating mode (TTL, M, MULTI).
Toggles between multi-group and single-group view.
Manual adjustment of flash power output levels.
Fine-tuning flash exposure in TTL mode.
Configuration for stroboscopic flash sequences.
On/Off control for the modeling light.
Adjusting the flash head's coverage angle.
Configuring high-speed and rear-curtain sync modes.
Enabling or disabling audible feedback sounds.
Configuring the 2.5mm sync port's function.
Transforms TTL data into M mode power settings.
Customizing shooting behavior (single, multi, app).
Guide to advanced custom parameter configurations.
Procedure to reset the device to its original default configuration.
Instructions for updating the device's firmware via USB.
Solutions for general problems like triggering or focus errors.
Diagnosing and fixing wireless triggering failures.
Guidelines for device care, environmental factors, and handling.
