To Next PageTo Next Page
Need help?Do you have a question about the Godox XProN and is the answer not in the manual?
General| Brand | Godox |
|---|---|
| Model | XProN |
| Type | Wireless Flash Trigger |
| Compatibility | Nikon Cameras |
| TTL | Yes |
| HSS | Yes |
| Wireless Frequency | 2.4GHz |
| Range | 100 meters |
| Channels | 32 |
| Groups | 5 |
| Max Sync Speed | 1/8000s |
| Power Source | 2 x AA Batteries |
| Firmware Upgrade | Yes |
| Display | LCD |
Details physical components like buttons, dials, ports, and connectors.
Introduces the screen elements and indicators.
Instructions for inserting AA batteries into the compartment.
Explanation of battery level indicators on the LCD panel.
Steps to use the trigger with a camera flash.
Steps to use the trigger with an outdoor flash.
Steps to use the trigger with original camera flashes.
Steps to use the trigger with a studio flash.
Steps to use the trigger as a remote shutter release.
Steps to use the trigger with a sync cord.
Instructions for operating the power switch.
Details on the auto standby and wake-up functions.
Control and function of the AF assist beam.
Procedure for setting the wireless channel.
Procedure for setting wireless ID to avoid interference.
Instructions for selecting flash modes (TTL, M, Multi).
Switching between multi-group and one-group modes.
Adjusting power output in M and Multi modes.
Adjusting FEC in TTL mode.
Configuring settings for multi-flash mode.
Controlling the modeling lamp ON/OFF.
Adjusting the flash zoom value.
Configuring high-speed and second-curtain sync.
Enabling or disabling the audible beep.
Configuring the sync socket (IN/OUT).
Transforming TTL value to M mode output.
Selecting one-shoot or multi-shoots mode.
Lists available custom functions and their settings.
Lists compatible flashes for XProN and X1R-N.
Addresses common problems like failure to trigger or focus.
Guidelines for handling, storage, and protection.
