Godox X1N User Manual

TTL
无线引闪器
TTL Wireless Flash Trigger
For Nikon
说 明 手 册
Instruction Manual
中英文双语
Chinese English Bilingual
705-X1N000-00
Made In China
地址/Add: 深圳市宝安区福永镇福洲大道西新和村华发工业园A4栋
Building A4, Xinhe Huafa Industrial Zone, Fuzhou RD West, Fuyong
Town, Baoan District, Shenzhen 518103, China
电话/Tel: +86-755-29609320(8062) 传真/Fax: +86-755-25723423
邮箱/E-mail: godox@godox.com
深圳市神牛摄影器材有限公司
GODOX Photo Equipment Co., Ltd
Technical Data
X1NModel
Yes (0~10ms, use 100us as the unit)
Receiver can control camera shooting through 2.5mm sync port
Adjust the flash's focal length through the transmitter
Wide LCD panel, backlight on/off
Transmitter: use a PC cord to input and output
Receiver: use a 2.5mm sync cord to output
Use the Micro USB port to upgrade
Settings will be stored 2 seconds after last operation and
recover after a restart
72x75x52(mm)/100g
70x65x47(mm)/70g
Others
Synchronization delay set
Wireless shutter release
ZOOM setting
LCD panel
Output interface
Firmware upgrade
Memory function
Dimension/Weight for Transmitter
Dimension/Weight for Receiver

Godox X1N Specifications

General

Type	Radio trigger
Weight	100 g
Compatibility	Nikon
Product color	Black

Summary

Safety Precautions

Safety Precautions

Using the Flash Trigger - Studio Flash

Wireless Studio Flash Trigger Setup

Using the Flash Trigger - Speedlight & Shutter

Wireless Speedlight Trigger Setup

Wireless Shutter Release Setup

Setting the Transmitter - Basic Configuration

Transmitter Power Switch

How to turn the transmitter on and off.

AF Assist Beam Switch

Controlling the AF assist beam output.

Transmitter Channel Setting

Steps to select and confirm the communication channel.

Transmitter Mode Setting

How to switch between TTL, M, and OFF modes for groups.

Setting the Transmitter - Group & Multi-Flash

Setting Current Group Value

Adjusting power or FEC for the currently selected group.

Setting Multi Flash Group ON/OFF

Enabling or disabling multi-flash mode for specific groups.

Setting Multi Flash Parameters

Configuring flash output, times, and frequency for multi-flash.

Setting Group Values

Synchronizing settings across multiple groups in the same mode.

Setting the Transmitter - Advanced Functions

Performing a Test Flash

How to check if the flash fires correctly using the test button.

Setting the Transmitter - Modes & Camera

Camera Synchronization Settings

Setting the Receiver - Basic Configuration

Setting the Receiver - Power & Attentions

Attentions and Care

General Attentions and Troubleshooting

Caring for the Flash Trigger

Technical Data

Technical Data

Detailed specifications and technical characteristics of the X1N flash trigger.

Technical Data (continued)

Using the Flash Trigger - Functional Guide

Wireless Studio Flash Trigger Operation

Wireless Speedlight Trigger Operation

Wireless Shutter Release Operation

PC Sync Socket Trigger Operation

Setting the Transmitter - Advanced Group & Multi-Flash

Current Group Settings

Adjusting settings for the currently selected group.

Multi Flash Group Settings

Multi Flash Parameter Setting

Group Settings

Test Flash Function

Setting the Transmitter - Power, C.Fn, Shutter Mode

Transmitter Auto Power Saving

Setting Custom Functions (C.Fn)

Configuring advanced features via the Custom Function menu.

Wireless Shutter Release Mode

Setting the Transmitter - Camera Settings

Setting the Camera for FP Flash

Setting the Receiver - Configuration & Power

Receiver Channel Setting

How to set the communication channel for the receiver.

Receiver Group Setting

Assigning the receiver to specific flash groups.

Receiver Auto Power Saving Mode