Need help?Do you have a question about the Gold Medal 8023 and is the answer not in the manual?
General| Brand | Gold Medal |
|---|---|
| Model | 8023 |
| Category | Grill |
| Language | English |
Machine must be properly grounded to prevent electrical shock. Do NOT immerse equipment in water. Unplug before cleaning or servicing.
Never put fingers or objects into the heating area. We do NOT assume any liability for injury due to careless handling.
Adequate eye protection must be used when servicing equipment to prevent the possibility of injury.
Any alterations void the warranty and may cause a dangerous situation. Never make alterations to the equipment.
Equipment is designed for commercial use only. Not for home use. Only trained personnel should operate.
Machine is NOT to be operated by minors (any person under the age of 18).
Unpack all cartons and check for transit damage. File claims immediately with the transportation company.
Requires 120V/60Hz/15A outlet on a dedicated line. Ensure proper electrical requirements are met by a qualified electrician.
Place hot dogs on rollers, turn heat to designated temperature. Left knob for front rollers, right for rear rollers.
Clean stainless steel daily. Do not use abrasives. Clean rollers with soft cloth/sponge and mild detergent.
Adequate eye protection must be used when servicing this equipment to prevent the possibility of injury.
Maintenance sections are for qualified service personnel familiar with electrical equipment, not operators.
Detailed illustration of components and their part numbers for the hot dog roller grills.
Internal view of components including motors, heat controls, and switches with part numbers.
Right hand side view of the flat roller machine, showing drive chains, sprockets, and brackets.
Left hand side view of the flat roller machine, detailing heat elements, idler sprockets, and springs.
Right hand side view of the slanted roller machine, illustrating drive components and retainers.
Left hand side view of the slanted roller machine, showing heat elements, idler brackets, and drive chains.
Instructions for ordering parts: identify part, include part number, name, quantity, model, and serial number.
Schematic showing electrical connections for heat switches, motors, and heat elements.
Details warranty terms for Gold Medal equipment: limited repair/replacement, period, exclusions, and contact information.
To Next Page
