Need help?Do you have a question about the Gold Medal 8024 and is the answer not in the manual?
General| Brand | Gold Medal |
|---|---|
| Model | 8024 |
| Category | Grill |
| Language | English |
Machine must be grounded to prevent electrical shock. Do not immerse in water. Unplug before cleaning.
Improper installation or alteration can cause injury, death, or damage. Read instructions before use.
Do not touch heated surfaces. Do not place objects on heated surfaces.
Always wear safety glasses when servicing. No user serviceable parts inside. Refer to qualified personnel.
Read operator's manual and safety instructions. Order copies from gmpopcorn.com.
Do not allow public contact. Only trained personnel may operate. Not for minor operation.
Check for transit damage immediately after unpacking. File claims with carrier.
Unit is factory tested. Remove packaging. Place on a sturdy, level base. Clean before use.
Lists power supply requirements (voltage, wattage, frequency) for different models.
Ensure switches are OFF, outlet is grounded and has proper polarity. Install unit level.
Place hot dogs on rollers. Adjust heat with knobs for desired temperature and capacity.
Do not immerse in water. Unplug before cleaning. Avoid touching heated surfaces.
Turn off, unplug, cool down. Remove hot dogs, clean rollers, drip pan, and exterior.
Electrical shock danger from improper grounding. No user serviceable parts. Refer to qualified personnel.
Sections are intended only for qualified service personnel familiar with electrical equipment.
Identify parts via photos/lists. Include part number, name, quantity, model, serial, and date.
Use only approved replacement parts when servicing this unit.
Orders can be placed by mail, phone, or online to Gold Medal Products Co.
Part numbers for various roller assemblies across different models.
Part numbers for Red O-Ring and White Teflon Bushing.
Part numbers for Drip Pans for different models.
Part numbers for Knob Control, DPST Rocker Switch, and Control Box.
Part numbers for Bottom Covers, End Covers, Glide Feet, Crutch Tips, and Strain Relief.
Part number for Lead-In Cord for all models.
Part numbers for Heat Control, DPST Rocker Switch, and CW/CCW Motors.
Part numbers for tube covers, retainers, sprockets, heat element, insulator, idler pivots, and mounting brackets.
Part numbers for drive chain, master link, drive sprocket, and RH idler bracket.
Part numbers for idler sprockets, phil pan, idler bracket assembly, springs, spring pivots, and idler pivots.
Part numbers for split lock washer, hex head bolt, and drive sprocket.
Part numbers for tube covers, retainers, sprockets, heat element, insulator, idler pivots, and mounting brackets.
Part numbers for drive chain, master link, drive sprocket, and RH idler bracket.
Part numbers for idler sprockets, phil pan, idler bracket assembly, springs, and spring pivots.
Part numbers for split lock washer, hex head bolt, and drive sprocket.
Diagram showing electrical connections for 8022 model, including heat switch, motor, and heat elements.
Diagram showing electrical connections for 8023, 8024, 8025 models, including dual heat switches and motors.
Two-year warranty on parts, six months on labor. Excludes misuse, neglect, or unauthorized alterations.
Must call Gold Medal Products Co. at 1-800-543-0862 to discuss problems before repair.
Equipment is manufactured and sold for commercial use only.
To Next Page
