To Next Page
A
Anthony KleinJul 28, 2025
Why does my Gold Note PIANOSA Turntable motor get hot?
- Hheather32Jul 28, 2025
Gold Note turntables utilize AC synchronous motors, which may warm up to 50° Celsius. This is normal and does not indicate any malfunction.
Why does my Gold Note PIANOSA Turntable motor get hot?
Gold Note turntables utilize AC synchronous motors, which may warm up to 50° Celsius. This is normal and does not indicate any malfunction.
How to level Gold Note PIANOSA Turntable?
To level your Gold Note Turntable, use a spirit level and adjust the feet by screwing or unscrewing them. Unscrewing a foot will increase the height of that corner.
How to clean Gold Note Turntable?
To clean your Gold Note Turntable, use ONLY a very soft, 100% cotton cloth to gently remove dust and stains. Ensure the cloth is dry. Avoid using any acids, alcohol, or abrasive cloths, as these can irreversibly damage the turntable's aesthetic.
How to level a Gold Note Turntable?
To level the Gold Note Turntable, use a spirit level to adjust the Turntable Platter through its shelf layer. Screw its feet for fine adjustments, ensuring the platter is level on both vertical and horizontal lines. Make sure the turntable layer is solid and rigid enough to support the turntable's weight.
How to clean a Gold Note Turntable?
To clean your Gold Note Turntable, use only a very soft, 100% cotton cloth to gently remove dust and stains. Avoid using any acids or abrasive cloths, as they can irreversibly damage the turntable's finish. Do not use alcohol on the anodized label, pulley, or motor spindle; use only a dry cloth for these parts.
Initial steps for setting up the turntable, including checking contents and connecting power.
Guidance on optimal placement and levelling of the turntable for best audio performance.
How to start and stop playback at 33 1/3 and 45 RPM using the turntable's buttons.
Instructions for entering and adjusting the fine speed control for precise calibration.
How to check and adjust the turntable's speed using a strobe light and calibration tool.
Addresses issues with turntable levelling and provides solutions for adjustment.
General| Platter Thickness | 30 mm |
|---|---|
| Platter Weight | 2.5 kg |
| Speed Control | Electronic |
| Wow & Flutter | < 0.1% |
| Type | Belt-drive turntable |
| Drive System | Belt Drive |
| Speed | 33/45 RPM |
| Speeds | 33⅓ and 45 rpm |
| Power | 100-240V AC |
| Motor | Low-noise AC synchronous motor |
| Platter | Aluminium |
