EasyManua.ls Logo

Gold Note VALORE Plus 425 User Manual

Gold Note VALORE Plus 425
20 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
OWNER’S MANUAL
VALORE Plus 425
Italian Prestige Turntable
Question and Answer IconNeed help?

Do you have a question about the Gold Note VALORE Plus 425 and is the answer not in the manual?

Gold Note VALORE Plus 425 Specifications

General IconGeneral
TypeBelt Drive Turntable
Speed33 1/3, 45 RPM
Speed ControlElectronic
Power consumption10 W
OutputRCA
Wow & Flutter0, 1%
Tonearm Length9"
Power supplyAC 100-240V, 50/60Hz
Cartridge TypeMM
Power Supply TypeExternal
Speed Accuracy±0.1%

Summary

Important Safety Information

Electrical Safety Warnings

Caution and warning symbols related to electrical shock and moisture hazards.

Product Handling and Usage Guidelines

Instructions on product disassembly, servicing, environmental protection, and power cord usage.

Specification and Technical Features

Main Features and Specifications

Lists key specifications like Wow & Flutter, Rumble, Speed, Transmission, Motor, Platter, and Bearing.

Set-Up Instruction

First Operation Steps

Step-by-step guide for initial setup and connection of the turntable.

Speed Control and Pitch Adjustment

Details on using 33/45 RPM buttons and the pitch control for fine speed adjustment.

Anti-Skate, Azimuth & Counterweight Adjustment

Installing the Anti-Skate Nylon Wire

Step-by-step guide for installing the anti-skate nylon wire and blocking the knot.

VTA Setup

Tone Arm Setup: Cylinder Eye and Azimuth

Guides for tone arm wire setup and azimuth adjustment for optimal performance.

Power Supply

Power Adapter & Speed Control

Calibration: Cartridge Overhang, Alignment & Speed

Speed Adjustment with Strobe Light

Guide on using a strobe light to verify and adjust turntable speed.

Overhang Calibration

Steps for positioning the cartridge tip for correct overhang using the calibration tool.

Cartridge Alignment

Phono Cartridge Alignment Procedure

Instructions for aligning the phono cartridge tip and body for optimal tracking.

Troubleshooting

Motor Heating and Noise Issues

Symptoms, causes, and remedies for motor heating and noise problems.

Adjustment

Turntable Levelling Procedure

Steps for levelling the turntable using a spirit level and adjusting feet.

Related product manuals