20mm thick Platter made of Acrylic
For the assembling the Turntable Platter you need these parts:
Platter Spindle Tip that clamps the platter (1x)
OWNER’S MANUAL page 7
Installing the platter
STEP 2
Thread the Platter Spindle Tip as show in the picture
STEP 3
The conical shape of the Platter Spindle Tip once firmly threaded
perfectly clamps the Turntable platter
STEP 1
Lay down the Platter of the turntable as
shown in the picture taking care it
perfectly fits the
spindle flat surface.
To Next Page
Loading...
