Goldair GCPAC314 - User Manual

Questions and Answers

J
Joan HallAug 1, 2025
Why is my Goldair GCPAC314 not cool enough?
- M
  Mrs. Becky RussellAug 1, 2025
  If your Goldair Air Conditioner isn't cooling sufficiently, several factors could be at play. First, ensure all doors and windows are completely closed. Eliminate any nearby heat sources. Verify that the exhaust air hose is properly connected and free from obstructions; clean it if necessary. Also, check the temperature setting and lower it if it's too high. Lastly, make sure the air inlet is not blocked; if it is, clean it thoroughly.
J
John GrantAug 7, 2025
What does E2 code mean on Goldair Air Conditioner?
- M
  Mike LevineAug 7, 2025
  The E2 code on your Goldair Air Conditioner indicates that the water tank is full. You should empty the water tank to resolve this issue.
E
Erin MooneyAug 13, 2025
What does E0 code mean on Goldair GCPAC314 Air Conditioner?
- M
  Michael ReyesAug 13, 2025
  The E0 code on your Goldair Air Conditioner indicates a failure of the room temperature sensor. You can replace the room temperature sensor, although the unit can continue to operate without replacing it.
D
Doris DoughertyAug 19, 2025
What to do if Goldair Air Conditioner does not start when pressing power button?
- V
  vhuynhAug 19, 2025
  Your Goldair Air Conditioner might not start if the water full indicator lamp is blinking, indicating that the water tank is full; in this case, empty the water tank. Alternatively, if you are in cooling mode, the room temperature may be lower than the set temperature; try resetting the temperature to a lower setting.
J
Joseph PittmanAug 26, 2025
Why is my Goldair GCPAC314 Air Conditioner so noisy?
- C
  Cody DavisAug 26, 2025
  Your Goldair Air Conditioner might be noisy due to a couple of reasons. If the unit is placed on ground that is not level or flat, try moving it to a flat, level surface. Also, the sound might be due to the normal flowing of refrigerant inside the air conditioner.