The provided document is an operating manual for a Goldair 2000W Oscillating Fan Heater, model GFH267.
Function Description
The Goldair GFH267 is a 2000W oscillating fan heater designed for household use. Its primary function is to provide heating and air circulation within a room. The device offers multiple operating modes, including fan-only, low heat, and high heat, along with an oscillation function to distribute warmth more broadly. It incorporates safety features such as a tilt switch, resettable thermal link, and a thermal fuse to prevent overheating and ensure safe operation.
Important Technical Specifications
- Model: GFH267
- Power: 2000W (Wattage: 1800-2000W)
- Supply: 220-240VAC 50Hz
- Type: Oscillating Fan Heater
- Safety Devices:
- Tilt Switch: Automatically turns off the appliance if not in the correct operating position.
- Resettable Thermal Link: Disconnects power at a pre-set overheat temperature and resets after cooling.
- Thermal Fuse: Permanently disconnects the appliance in case of overheating (non-resettable).
- Approval: TUV020654EA
- QC Passed: PO#-WWYY
- Origin: Made in China
Usage Features
The heater features a control switch and a thermostatic control for user-defined operation.
Heater Control Switch Positions:
- "0": OFF
- : Fan Only
- "I": Low Heat
- "II": High Heat
Thermostatic Control:
- Rotate the thermostat knob clockwise to the maximum position.
- Once the room reaches a comfortable temperature, slowly turn the knob anti-clockwise until the heater clicks off.
- The heater will then cycle on and off to maintain the set comfort level.
- Users are advised to note this setting for future use.
Oscillation Function:
- To activate oscillation, press the switch on the front of the heater to the 'I' position.
General Usage Guidelines and Warnings:
- Placement: Always choose a safe, flat, stable, heat-resistant surface. Keep all objects at least 1 meter from the front, sides, and rear of the appliance to reduce fire risk. Do not place on bedding or thick/long carpets that may block openings.
- Covering: WARNING: Do not cover the appliance, as this presents a fire risk and will permanently disable the unit.
- Supervision: WARNING: Never leave the heater unattended when in use. Do not use in small rooms occupied by persons unable to leave on their own, unless constant supervision is provided.
- Automatic Devices: WARNING: Do not use with programmers, separate timers, remote-control systems, or any other device that switches the heater on automatically, due to fire risk if covered or positioned incorrectly.
- Power Cord: Ensure the power cord is not tight, twisted, kinked, or wrapped around the appliance. Always unroll the cord completely before use. It is recommended to plug the appliance directly into a wall socket. If an extension cord is used, it must be correctly specified and undamaged. Do not remove the plug by pulling the cord; always grip the plug.
- Foreign Objects: Do not insert or allow foreign objects into ventilation or exhaust openings to prevent electric shock, fire, or damage.
- Environmental Restrictions: Do not operate in areas where petrol, paint, or other flammable liquids are used or stored. Do not use near baths, showers, swimming pools, or other liquids.
- Moving: Switch off the appliance and use the provided handle when moving.
- Children and Vulnerable Persons: This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, unless supervised or instructed by a responsible person. Children should be supervised to ensure they do not play with the appliance.
- Damage: Do not use the appliance if it has been dropped or damaged, or if the supply cord is damaged. In such cases, contact the manufacturer, service agent, or similarly qualified persons for repair.
Maintenance Features
The manual emphasizes regular cleaning and outlines specific instructions for care.
Care and Cleaning:
- Unplug: Always unplug the heater from the mains supply before cleaning.
- Cool Down: Ensure the heater has cooled down completely before cleaning.
- Dust Removal: The common cause of overheating is dust or fluff. Regularly remove these deposits by vacuum cleaning the air vents and grills.
- Exterior Cleaning: Use a damp cloth (not wet), rinsed in hot soapy water, to wipe the exterior of the heater to remove dust and dirt.
- Cleaning Agents: Never use solutions such as petrol, thinners, or polishing agents.
- Drying: Ensure the heater is completely dry before plugging it back into the mains supply.
- Dismantling: Do not attempt to dismantle the heater. There are no user-serviceable parts. For service or repair, contact an authorized electrical service technician.
General Maintenance Advice:
- Regularly check the supply cord for any damage.
- If the appliance malfunctions or has been dropped or damaged, take it to a qualified electrical person for examination, service, or repair.
- The product is warranted against faults and manufacture when used in normal domestic use for a period of two years. For non-domestic use, the warranty is three months.
- The warranty excludes damage caused by misuse, neglect, shipping accidents, incorrect installation, or work carried out by anyone other than a qualified electrical service technician.
- Retain the purchase receipt as proof of warranty.
Need help?
To Next Page
General
