The Goldair 2200W Ceramic Tower Heater, model GCT360, is an indoor heating appliance designed for household use. It provides warmth through ceramic heating elements and features a tower design, making it suitable for various room settings. The heater can be operated via a touchscreen control panel located on the unit or through a supplied remote control, offering convenience and flexibility in managing its functions.
Function Description
The primary function of the Goldair GCT360 is to provide heating for indoor spaces. It operates in a STANDBY mode when initially plugged in and the main power switch is turned on. From STANDBY, the heater can be turned ON/OFF using the dedicated button on the control panel or remote. When turned ON, it initially blows room temperature air, and the LED display shows the current room temperature.
The heater offers multiple operating modes to suit different heating needs:
- Fan Mode: In this mode, the heater circulates room temperature air without engaging the heating elements. This can be useful for general air circulation.
- Low Heat Mode: This mode provides a lower level of heating, suitable for maintaining a comfortable temperature or for smaller rooms.
- High Heat Mode: This mode delivers maximum heating output, ideal for quickly warming up a room or for larger spaces.
The heater also features an Auto (Ai) Mode, which is activated when a desired temperature is set using the '+' and '-' controls. In Auto mode:
- If the set temperature is more than 4°C higher than the current room temperature, the heater will run on high heat mode to reach the target temperature faster.
- If the set temperature is equal to or less than 4°C higher than the current room temperature, the heater will run on low heat mode.
- If the set temperature is equal to or lower than the current room temperature, the heater will switch to fan mode, blowing out room temperature air.
A Timer function is integrated, allowing users to program the heater to turn ON or OFF automatically after a set period. When the heater is ON, the timer can be set to turn it OFF, and when the heater is OFF, the timer can be set to turn it ON. The timer can be increased in 1-hour increments, up to a maximum of 9 hours. Once the desired timer duration is set using the TIMER button and the '+' and '-' controls, the function is activated after the LED display stops flashing.
For broader heat distribution, the heater includes a Swing function that oscillates the unit, spreading warmth across a wider area. This feature can be turned ON or OFF as needed.
Usage Features
The Goldair GCT360 is designed with several features to enhance user experience and safety:
- Control Options: Users can operate the heater directly via the touchscreen control panel on the unit or remotely using the provided remote control. This dual control option offers flexibility, allowing adjustments from a distance.
- LED Display: The control panel features an LED display that shows the current room temperature and indicates the selected operating mode (Fan, Low Heat, High Heat) through specific icons.
- Temperature Adjustment: The '+' and '-' buttons allow for precise temperature setting, enabling the heater to maintain a desired room temperature in Auto mode.
- Oscillation: The swing function helps distribute heat evenly throughout the room, preventing hot spots and ensuring more uniform comfort.
- Safety Devices: The heater incorporates three key safety mechanisms:
- Tilt Switch: This automatically turns the appliance off if it is knocked over or not in its correct operating position, preventing potential hazards.
- Resettable Thermal Link: In the event of overheating, this device automatically disconnects power to the appliance. Once the unit cools down, it will reset and power on again. If this occurs, it's important to investigate and address the cause of overheating.
- Thermal Fuse: As a non-resettable safety feature, the thermal fuse permanently disconnects power to the appliance in severe overheating situations, providing a last line of defense against fire hazards.
- Initial Use Odour: When the appliance is first turned on, it may emit a slight odour or smoke. This is a normal occurrence due to the initial heating of the elements and should not recur.
Maintenance Features
Regular maintenance is crucial for the safe and trouble-free operation of the Goldair GCT360 heater.
- Cleaning:
- Always unplug the heater from the mains supply and ensure it has completely cooled down before cleaning.
- The primary cause of overheating is the accumulation of dust or fluff within the appliance. To prevent this, regularly unplug the heater and use a vacuum cleaner to clean the air vents and grills.
- The exterior of the heater can be wiped with a damp (not wet) cloth rinsed in hot soapy water to remove dust and dirt.
- Avoid using abrasive cleaning products, petrol, thinners, or polishing agents, as these can damage the appliance.
- Ensure the heater is completely dry before plugging it back into the mains supply.
- No User Serviceable Parts: The heater is designed without user-serviceable parts. In case of malfunction, damage, or the need for repair, users should not attempt to dismantle the heater. Instead, contact the place of purchase or an authorised electrical service technician.
- Cord Care: Regularly check the supply cord for any signs of damage. If the cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid hazards. Avoid twisting, kinking, or wrapping the cord around the appliance, as this can weaken and split the insulation. Always ensure the cord is fully unrolled before use and not placed under carpets, rugs, or furniture where it could be tripped over or cause heat build-up.
- Storage: When not in use, especially for extended periods, ensure the heater is unplugged and stored in a safe, dry place.
Need help?
General
To Next Page
