Goldair GCT325 - User Manual

Need help?

Do you have a question about the Goldair GCT325 and is the answer not in the manual?

Summary

Operating Instructions and Product Overview

General Care and Safety Guide

Key Safety Warnings

Highlights critical cautions and warnings regarding appliance usage, user limitations, and potential hazards.

Usage and Placement Guidelines

Provides instructions on correct placement, handling, and operational conditions to ensure safe use.

Maintenance and Cleaning Procedures

Details on how to clean the appliance, prevent overheating, and information on user serviceable parts.

Prohibited Uses and Locations

Specifies restrictions on drying clothes, use near liquids, and placement in enclosed or hazardous areas.

Operating Your Heater

Operating Safety Precautions

Critical warnings for safe operation, focusing on preventing fire, overheating, and unattended use.

Heater Control Panel

Explanation of the control panel buttons and their functions for operating the heater.

Safety Devices

Information on the built-in safety features such as the tilt switch and resettable thermal link.

Care and Cleaning

Instructions for regular cleaning to ensure trouble-free operation and appliance longevity.

Technical Specifications

Key technical details of the heater, including model, power supply, and wattage.

The Goldair 2000W Ceramic Tower Heater, model GCT325, is a household appliance designed for indoor heating. It operates on a supply of 220-240VAC at 50Hz and has a wattage of 2000W.

Function Description:

This ceramic tower heater provides warmth through its heating elements. It features a control panel that allows users to manage its various functions, including power on/off, heat settings, temperature adjustment, timer, and oscillation. The heater is equipped with safety devices to prevent overheating and ensure safe operation.

Important Technical Specifications:

Model Number: GCT325
Power Supply: 220-240VAC, 50Hz
Wattage: 2000W (High Heat), 1000W (Low Heat)
Temperature Range: 15 to 30 degrees Celsius (adjustable via thermostat)
Timer: 1 to 12 hours (in 1-hour increments)
Safety Devices: Tilt Switch, Resettable Thermal Link

Usage Features:

The heater's control panel includes several buttons for easy operation:

ON/OFF Button: This button powers the heater control panel on and off.
HEAT SETTING Button: Pressing this button cycles through different heat modes:
- High (2000W): Provides maximum heating power.
- Low (1000W): Offers reduced heating power.
- ECO: A pre-set mode where the temperature is fixed at 20 degrees Celsius and cannot be adjusted.
THERMOSTAT (ADJUST UP/DOWN) Buttons: These arrow buttons allow users to set their desired comfort temperature between 15 and 30 degrees Celsius. Once set, the display shows the current room temperature. The heating function automatically turns off when the room temperature reaches the preset temperature and turns on (either low or high heating) if the room temperature drops below the preset.
TIMER Button: This feature allows users to program the heater to switch on or off automatically after a set period, from 1 to 12 hours, in 1-hour increments. Repeatedly pressing the timer button sets the desired duration.
OSCILLATION Button: This button activates or deactivates the heater's oscillation function, allowing it to rotate and distribute heat more widely across a room.

Safety Precautions for Usage:

Always place the heater on a flat, stable, heat-resistant surface.
Ensure all packaging is removed before use.
Do not cover the heater, as this presents a fire risk and will permanently disable the unit via the safety fuse.
Maintain a minimum distance of 1 meter from the front, sides, and rear of the appliance to any objects, textiles, curtains, or flammable materials to reduce fire risk.
Do not use the heater with external switching devices such as programmers, separate timers, or remote-control systems that switch the heater on automatically, as incorrect positioning or covering can lead to a fire hazard.
Never leave the heater unattended when in use.
Ensure the power cord is not tight or pulled, as a partially inserted plug can overheat and cause fire.
The appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless supervised or instructed by a responsible person.
Children should be supervised to ensure they do not play with the appliance.
Do not use the appliance in small rooms occupied by persons incapable of leaving the room on their own, unless constant supervision is provided.
Use only the voltage specified on the rating label.
The appliance is for household use only, not commercial or industrial.
Indoor use only.
Do not use the appliance if it has been dropped or damaged.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
Do not twist, kink, or wrap the cord around the appliance, as this can weaken and split the insulation. Ensure the cord is fully unrolled before use.
It is recommended to plug the appliance directly into a wall socket. Power boards are generally not rated for high wattage appliances.
If an extension cord is used, it must be correctly specified, undamaged, and used safely.
Always switch off the appliance before removing the plug from the power socket.
Do not remove the plug by pulling the cord; always grip the plug.
Do not place the cord under carpet or cover it with rugs or furniture. Arrange the cord to prevent tripping hazards.
Do not place the appliance on bedding or thick/long carpet where openings may be blocked.
Switch off the appliance and use the provided handle when moving it.
Do not place the appliance close to a radiant heat source.
Do not insert foreign objects into ventilation or exhaust openings, as this may cause electric shock, fire, or damage.
Do not sit on the appliance.
Do not operate in areas where petrol, paint, or other flammable liquids are used or stored.
Do not use this appliance in the immediate surrounds of a bath, shower, swimming pool, or other liquids.
The appliance must not be immersed in any liquids.
Do not place the unit in wardrobes or other enclosed spaces, as this may cause fire hazards.
This unit is not intended for use in or around locations where foodstuffs, works of art, or delicate scientific articles are stored.
If the appliance malfunctions, contact the place of purchase or the Customer Services Team.

Maintenance Features:

Regular Cleaning: The heater requires regular cleaning to ensure trouble-free operation.
Before Cleaning: Unplug the heater from the mains supply and allow it to cool down completely.
Dust and Fluff Removal: The common cause of overheating is deposits of dust or fluff. Regularly remove these deposits by unplugging the appliance and vacuum cleaning the air vents and grills.
Exterior Cleaning: Use a damp (not wet) cloth rinsed in hot soapy water to wipe the exterior of the heater to remove dust and dirt.
Avoid Harsh Cleaners: Never use solutions such as petrol, thinners, or polishing agents.
Drying: Ensure the heater is dry before plugging it back into the mains supply.
No User Serviceable Parts: There are no user serviceable parts installed in the unit. Do not attempt to dismantle the heater. For service or repair, contact an authorized electrical service technician.

Warranty Information:

The Goldair heater comes with a two-year warranty for faults and manufacturing defects under normal domestic use. For non-domestic use, the voluntary warranty is limited to three months. Goldair will repair or replace defective products at no charge during the warranty period. The warranty excludes damage caused by misuse, neglect, shipping accidents, incorrect installation, or work carried out by unqualified technicians. Customers should retain their receipt as proof of purchase for warranty claims. The warranty benefits are in addition to other legal rights and remedies.