To Next PageTo Next Page
Need help?Do you have a question about the Golden Blount SUPER-FIRE SF3624-TV and is the answer not in the manual?
General| Brand | Golden Blount |
|---|---|
| Model | SUPER-FIRE SF3624-TV |
| Category | Indoor Fireplace |
| Language | English |
Critical instructions to follow before starting installation to prevent damage or injury.
Actionable steps to take if you smell gas, emphasizing safety and external notification.
Prohibits storing flammable liquids, stresses qualified installation, and mentions damper position.
Details on the appliance's design, model, and fuel type compatibility.
Specifies minimum clearance dimensions for the firebox and surrounding areas.
Guidelines for installing the fireplace in a bedroom, including unconfined space volume.
Information on suitable mounting surfaces and construction of fireplace framing.
Warnings about appliance placement, proximity to combustibles, and operating in negative pressure environments.
Guidelines for chimney height, offset angles, and specialized caps for optimal draft.
Details on contacting ENERVEX for custom venting systems and compliance with codes.
Instructions for installing the outside air kit and connecting the gas supply line.
Guidance on finishing the wall around the fireplace and installing a hearth extension.
Steps for preparing the burner pan and placing the logs for the gas fireplace.
Procedure for field-installing the massive refractory brick panels inside the firebox.
Instructions for installing the downdraft diverter to prevent downdrafts affecting burner operation.
Step-by-step guide for arranging the logs on the grate for optimal appearance and performance.
Instructions for installing the optional glass door tracks, springs, and doors.
Procedure for initial lighting, including purging air from gas lines and pilot ignition.
Warnings for children, maintenance checks, and turning off gas before servicing.
Information about initial odors during first use and expected main burner flame characteristics.
Guidance on pilot inspection, cleaning, and periodic examination of the venting system.
Critical safety steps before lighting, including smelling for gas and checking appliance condition.
Step-by-step guide for lighting the pilot light using the piezo ignitor and turning on the main burner.
Steps for safely turning off the gas supply to the appliance via the control knob.
Critical safety precautions for installations using LPG, focusing on leak detection and emergency response.
Diagnosing and correcting issues where the spark ignitor fails to light the pilot.
Troubleshooting steps for a pilot light that extinguishes after ignition.
Diagnosing why the main burner fails to ignite or operate when the pilot is lit.
Addressing issues where both pilot and main burner go out while the appliance is in use.
Procedure for initial lighting, purging air from lines, and igniting the pilot with the spark device.
Information about initial odors during first use and checking flame sensor engagement with pilot.
Safety checks before lighting, including turning off the switch and checking batteries.
Procedure for starting the appliance using the automatic ignition device and turning on the burner.
Diagnosing issues with the ignitor not sparking or the pilot light failing to ignite.
Troubleshooting pilot flame problems, venting issues, and gas supply concerns.
Details the terms and conditions of the limited warranty for the fireplace and its components.
