What to do if Golden engineering Portable Generator displays 'Low Battery Please Charge'?
If your Golden engineering Portable Generator displays 'Low Battery Please Charge', it means the battery voltage is below 15V. You should charge the battery.
What to do if Golden engineering Portable Generator power is on, but X-ray does not pulse?
If the power lights are on, but the X-ray on your Golden engineering Portable Generator is not pulsing, try charging or replacing the battery. If that doesn't work, replace the fuse.
What to do if Golden engineering Portable Generator unit stops pulsing and LCD displays 00?
If your Golden engineering Portable Generator stops pulsing mid-pulse and the LCD shows '00', charge the battery. If that doesn't solve the problem, replace the fuse.
What to do if Golden engineering XR150 has power on lights, but X-ray pulsing light does not illuminate, X-ray does not pulse?
If the power lights are on, but the X-ray pulsing light doesn't illuminate and the X-ray doesn't pulse on your Golden engineering Portable Generator, go to the settings menu and disable failsafe. To fix the light, replace the processor board.
What to do if Golden engineering XR150 X-ray pulses, but no image or black image?
If your Golden engineering Portable Generator X-ray pulses, but there is no image or the image is black, return the unit for tube replacement if there is no X-ray output dose.
What to do if Golden engineering XR150 'power on' light doesn't work?
If there is no 'power on' light on your Golden engineering Portable Generator, replace or charge the battery. Also, make sure the battery is securely attached and the battery clips are not bent or broken.
Why Golden engineering XR150 Portable Generator is leaking oil?
If your Golden engineering Portable Generator is leaking oil, return it for repair.
Why Golden engineering XR150 makes loud popping noise while pulsing?
If your Golden engineering Portable Generator makes a loud popping noise while pulsing, stop using it and return it for repair. Continued use in this condition will cause additional damage to the unit.
What to do if Golden engineering XR150 Portable Generator stops pulsing and shows 00?
If the Golden engineering Portable Generator stops pulsing mid-operation and the LCD shows '00', try charging the battery. This may resolve the issue.
What to do if Golden engineering XR150 is leaking oil?
If there's oil leaking from your Golden engineering Portable Generator, return it for repair.
General| Brand | Golden engineering |
|---|---|
| Model | XR150 |
| Category | Portable Generator |
| Language | English |
To Next Page
