25
VII. OPERATION
OPERATION/DIAGNOSTICS
For BUZZ
TM
ABOUT Units with the LiNX Controller
If, when powered up, there is an error with the system, then the status
indicator will flash red. The number of flashes will indicate the type of
error. These are described in the table below.
Status Indicator
The LiNX modules are not user serviceable. Do not attempt to repair LiNX
modules.
Flash
Code
Description
1 Remote / joystick error
Check LiNX connections and wiring.
Replace the LiNX Control Unit.
2 Network or configuration error
Check LiNX connections and wiring.
Replace the LiNX Control Unit.
3 Left motor error
Check the left motor, connections and
cabling.
4 Right motor error
Check the right motor, connections and
cabling.
5 Left park brake error
Check the left park brake, connections
and cabling.
6 Right park brake error
Check the right park brake, connections
and cabling.
7 Module error (other than Remote)
Check LiNX connections and wiring.
Replace the Power Module.
To Next Page
