Golden Buzzaround Lite - Disassembling Your Buzzaround Lite; Component Removal Steps


24
VII. DISASSEMBLY

DISASSEMBLY
Your Buzzaround Lite scooter is designed to be disassembled easily in order to be
transported. When disassembling your scooter, please be sure to follow these simple
instructions.
Remove the Seat
1. Place your scooter on a level surface.
Remove the key from the key switch before you begin to disassemble
your Buzzaround Lite.
2. (Optional) Loosen the armrest adjustment knobs and remove the arms from the seat.
This will reduce the weight of the seat making it easier to lift.
Never pull on the arms or use them as a handle to move the scooter
as they could inadvertently pull out of the receiver bar causing injury.
3. Grip the seat on opposite sides and, with a firm grip; pull the seat straight up.
See figure 14.
Figure 14. Removing the Seat Figure 15. Removing the Battery Pack
Remove the Battery Pack
4. Lift the battery pack off the scooter. See figure 15.
Remove the Front Basket
5. Remove the front basket by pulling up.