Need help?Do you have a question about the GoldenEar Technology T66 and is the answer not in the manual?
Details the types and number of drivers used in the speaker system.
Specifies the speaker's sensitivity to power input.
Indicates the range of audio frequencies the speaker can reproduce.
States the speaker's electrical impedance.
Suggests the appropriate amplifier power range for the speakers.
Provides the physical size measurements of the speakers.
Guidance on selecting between spikes and rubber tips for speaker bases.
Step-by-step instructions for attaching spikes or rubber tips to speaker bases.
Procedure for reattaching foot cones and locking nuts if disassembled.
Recommendations for placing speakers as front left and right channels.
Guidance on positioning speakers for surround sound applications.
Instructions for connecting full-range, equal-length speaker cables.
Procedure for bi-wiring speakers, including jumper removal.
How to use the LFE input alongside speaker cables.
Connecting to processors with a single LFE output using a Y-connector.
Essential safety warnings and symbols for product operation.
Information on disposing of the product according to European WEEE directive.
Comprehensive list of safety instructions for product use.
Procedure for checking speakers for any damage incurred during shipping.
Step-by-step guide for safely removing speakers from their packaging.
Explains how amplifier distortion can damage speakers.
Guidance on setting volume and understanding amplifier power usage.
Information on the limits of speaker and amplifier performance.
Advice on selecting the appropriate amplifier power for speakers.
How room characteristics affect speaker sound quality.
Recommended duration for breaking in new speakers for optimal performance.
Tips for positioning speakers to achieve accurate tonal reproduction.
Guidance on speaker placement for optimal bass and soundstage.
Instructions for connecting speakers using only speaker cables.
Recommendations for setting bass and treble controls.
Information on powering up the active subwoofer section.
Configuring bass management settings on AV receivers/processors.
Adjusting individual speaker channel levels for balance.
Tuning low-frequency balance when using the LFE input.
General| Type | Floorstanding Speaker |
|---|---|
| Nominal Impedance | 8 Ohms |
| Weight | 60 lbs (27.2 kg) |
| Product Name | T66 |
| Tweeter | High-Velocity Folded Ribbon (HVFR) |
| Frequency Response | 32Hz - 35kHz |
| Sensitivity | 90 dB |
| Recommended Amplifier Power | 20 - 400 Watts/channel |
To Next Page
