Need help?Do you have a question about the Goldmund SR2.3 and is the answer not in the manual?
Optimum sound quality is reached after 15 minutes of power-on.
Reverting speaker cable polarity can increase sonic quality, requires experimentation.
Inverting AC plugs can improve sonic quality; experiment with speaker polarity.
DC-coupled amplifier with feedback DC control to protect speakers from amplified DC.
Amplifier self-limits output current during short-circuits to prevent damage.
Nominal power before clipping: 2x200 W RMS (2-8 Ohms).
Figures valid for the circuit alone, at any level between 0 and nominal power.
Nominal level: 0.75 V. Input impedance: 50 kOhms.
Dynamic TID < 0.01 % (-80 dB), Static THD < 0.01 % (-80 dB).
Slew rate: > 240 V/us. Rise time: < 260 ns.
Nominal line voltage: 117 or 234 V. Max power consumption: 450 W.
3 years parts and labor.
To Next Page
General