Need help?Do you have a question about the Goldmund SRP2.3 and is the answer not in the manual?
Advice on proper ventilation and avoiding proximity to temperature-sensitive equipment.
Verify voltage setting and check fuse type (0.5A for 220V, 1A for 110V).
Instructions for connecting power, interconnects to power amp, and sources to inputs.
Notes on digital inputs and activating SSP Direct cinema input via jumper.
Automatic power-on, stabilization, volume adjustment, and source selection.
Details remote controls for volume, muting, and pre-programming levels.
Explains that optimal sound quality is achieved after several hours of warm-up.
Advises on cleaning with a soft cloth and periodic DC offset readjustment.
Lists output level, impedance, and frequency response characteristics.
Details input sensitivity, group delay, distortion figures, and slew rate.
Covers noise, operating temperatures, power supply, and grounding.
Identifies the VOLUME control and SELECTOR switch on the front panel.
Specifies AC line connector and RCA connectors for inputs/outputs.
States the physical size and weight of the preamplifier.
Details the warranty duration for parts and labor.
To Next Page
General