2. INSTALLATION
INSTALLATION
Please follow these instructions carefully
All equipment must be sitting level for proper operation and combustion where plinth
type installation is made, plinth height and front overhang must be 50 mm minimum.
Levelling can be made by the use of metal shims. For performer series where adjustable
legs are provided, levelling can be made easily due to the threaded construction of the
legs.
LIGHTING INSTRUCTIONS
1. All range and roast ovens are complete with instructions on a Decal attached to
the appliance on the front stainless fascia.
2. Performer range top arrangement:
A. All open burners may be ignited by the constant pilots.
B. Griddle top and hot top sections are provided with flame failure device gas
cocks Model 21S and is ignited by Piezo ignition.
ADJUSTMENT
Adjustments to burners and burner pilots can be made when necessary by any
qualified service organisation or your local gas utility service department.
NOTICE
PLEASE RETURN YOUR WARRANTY CARD
FAILURE TO DO SO WILL VOID WARRANTY
ON THE EQUIPMENT
IM036B2/5
To Next Page
Loading...
