3. Registering your GolfBuddy CT2:
• Connect your GolfBuddy unit to a USB port on your computer using the USB cable provided with
the unit.
• After a short time, your GolfBuddy unit should show an icon on the screen indicating it is connected
to the computer.
Notes: You can disregard any driver download requests that your computer may say is required.
• Click on the blue GB icon on your desktop and open the Login Panel.
• Enter your User ID and
Password. You should
now see a panel that
indicates the GB Manager
is searching for the device.
After a short time, you
will see “Connection
Established”. At this stage,
your unit is successfully
registered to the account
that you created and you
will not be able to register
your unit under a dierent
account.
4. Updating your GolfBuddy CT2 in three Steps
Step #1
Once you get the
“Connection Established”
message, please click
“Next” to proceed to Step
#2. Firmware Update.
13
To Next Page
Loading...
