To Next PageTo Next Page
Need help?Do you have a question about the GOM ATOS II Triple Scan and is the answer not in the manual?
Details safety precautions, laser warnings, electrical hazards, and handling guidelines.
Details technical specifications for different ATOS system types, including measuring volumes and power.
Presents a detailed table of sensor configurations, including measuring volumes, distances, and calibration objects.
Describes how to access and use the ATOS sensor's web interface for status monitoring.
Details how to adjust the sensor's laser pointers for precise measurement alignment.
Provides instructions for the careful handling and cleaning of calibration objects to maintain accuracy.
Details the calibration procedure using the CP40 calibration panel for specific measuring volumes.
Provides specific handling and cleaning instructions for the CP40 calibration panel.
Explains how to load calibration data from the CD into the ATOS software.
Guides on preparing the ATOS software and sensor for calibration using the CP40 panel.
Details the step-by-step calibration procedure using the CP40 panel, including exposure time adjustment.
Explains how to interpret the calibration results obtained with the CP40 panel.
Provides specific handling and cleaning instructions for the CC30 calibration cross.
Guides on entering calibration data for the CC30 cross into the ATOS software.
Details how to prepare the ATOS software and sensor for calibration using the CC30 cross.
Outlines the calibration process using the CC30 cross, including image acquisition and computation.
Explains how to interpret the calibration results obtained with the CC30 cross.
General
