Gomco 6036 - Troubleshooting

9.0 TROUBLE SHOOTING
l
PROBLEM
PROBABLE CAUSE
REMI
:dy
PUMP WILL NOT RUN
WHEN SWITCH IS
PUSHED “ON"
1. POWER SOURCE BAD OR
INCORRECT VOLTAGE.
2. WIRING INCORRECT.
3. MOTOR BURNED OUT.
4. FAULTY SWITCH.
CHECK POWER
CHECK WIRING
ILLUSTRATION 1
REPLACE MOTC
REPLACE SWIT<
OUTLET
SEE
JO. 8.
R/PUMP.
5H.
LOW SUCTION
1. LOOSE BOTTLE CAP OR
TUBING CONNECTION.
2. BACTERIA FILTER
CLOGGED.
3. PUMP DIAPHRAGM
TORN.
4. FAULTY SOLENOID
VALVE.
5. WIRING INCORRECT TO
VALVE.
CHECK ALL COf
REPLACE FILTE
REPLACE DIAPh
6.2.4.
REPLACE SOLEI
CHECK WIRING,
ILLUSTRATION t
INECTIONSi
T SEE 6.3.
RAGM, SEEf
JOID, SEE 0.6.
SEE
IO. 8.
NO TIMING ADJUSTMENT
1. FAULTY POTENTIOMETER.
2. FAULTY TIMER.
REPLACE POTEI
REPLACE TIMEF
—
JTIOMETEfl.
WARNING: All internal maintenance must be performed by qualified service personnel only.