Gong HIPE - Footstraps

EN
- 22
FOOTSTRAP INSTALLATION
3 - Caution: it is imperative to screw perfectly vertically
to the threads and above all not to leave any sand
in the threads before screwing. You could cause
non-repairable damage to the threads.
4 - Repeat this procedure for the second strap.
17 cm
17 cm 17 cm
Adjustthewidthofyourfootstrapbyselectingtherowofholesthattsthesizeofyourfeet.
For a tighter t, use the middle rows, to loosen the footstrap, use the outer rows of the strap.
1 - Lift the neoprene sleeve to access the holes in
the footstrap, which are designed to receive the
screws.
2 - Position the serrated plate opposite the footstrap
insert. Use two screws for each end of the
footstrap and insert them into the external holes
of the serrated plate.
TheHIPEareequippedwithfootstrapinsertsdedicatedtothepractice
ofWingfoilandKitefoil.For use in SUP foil or Surf foil, we recommend
strapless practice. Your footstraps are delivered with screws adapted to the
depth of the footstrap inserts and serrated plates to block their rotation.
x10
x5
17 cm
17 cm 17 cm