Gong HIPE - Screws and Washers

EN
- 23
GONG-GALAXY.COM
Makeatesttomakesurethestrapiscorrectly
adjusted: the strap must be neither too loose nor too
tight: you must be able to slide your feet easily into the
straps and remove them easily too. But there should be
no gap between the top of your foot and the strap. They
must be in contact with each other. Note that the setting
must be changed if you practice with neoprene booties
or if you practice barefoot.
SCREWS AND WASHERS SUPPLIED
Inordertobeperfectlycompatiblewithourdierentfoiltopplatemodels,yourHIPEisdelivered
with3setsofscrews.Youcanidentifybelowthemodelofyourfoil’stopplateandchoosethe
appropriatescrews.
CARBON MAST
4 x Screws M6x20mm Torx Round head & 4 washers
TOP PLATE FOIL V2
4 x Screws M6x16mm Torx Round head & 4 washers
TOP PLATE V2 FOIL V1
4 x Screws M6x16mm Torx Round head & 4 washers